Conventional Fire System Panels RE-104-4 Zones

-

Overview

The microprocessor based 4 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCD character, 4 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.




Special Feature

Ravel Indian Manufacturer, International standard.
Switch Mode Power Supply.
Modular Construction, Serviceable.
Surface Mount Technology.
Battery polarity & deep discharge protection.
As per IS -15908: 2011 Standard.
16 X 2 Dot Matrix LCD Display.
Standby battery backup with built in charging.
Fire / Fault status in unambiguous colored LED indication.
Switch Mode Power Supply.
Tactile Keypad for easy panel operation.
System on indication.
Main, Standby status indication.
Low Battery visual warning with audible tone.
Relay output for actuators for Fire and Fault.
Lamp Test facility
Zone wise one man walk Test Facility.
Zone wise Isolation facility with loop voltage cut off.
Compatible to all type of Conventional Detectors.
Optional Zone Wise Sounder / Zone Wise Contact.

Tech Specification

Electrical Specification                 

Primary Power

120 – 220VAC , 50 Hz

Common Relays

Type                                       :  Form C
No of Relays                          :   3
Relay Contact Rating           :  2Amps @ 30 VDC, 0.5Amps @125VAC.
Power Factor   

Standby Power

24V D.C (2 Nos of 12v, 7Ah Sealed Lead acid battery).
Quiescent current   :   55mA         

Operating Condition

Operating Temperature   :   0 – 49° C/32-120° F.
Relative Humidity            :   93 ± 2% RH (non- condensing) at 32 ±2° C/90 ±3° F.

Initiating Device Circuits (Zone Circuit)

All zones are Class B wiring
Normal Operating Voltage   :   14- 21 VDC
Alarm Current                      :   15 – 30mA
Short Circuit Current          :   42mA Maximum
Loop resistance                     :   50 ohms Maximum
End-Of-Line Resistor          :   4.7K, 1/4watt
Standby Current                  : 6.8mA (2.4mA for Detectors)

Charging Circuit

Charging Voltage 28.2V, ±0.5V
Charging Current 0.5 A (Max.).  

Notification Appliance Circuits

Class B wiring
Operating Nominal Voltage   :   24VDC
Current for NACs   :   0.6 Amp
End-Of-Line Resistor   :   4K7, 1/4 watt
Mechanical Specification
Dimensions                              (350W X 250H X 100D)
Color                                         Red / White
Construction                             18 Gauge (1.22mm) CRCA sheet with powder-coated Finish
IP Rating                                  IP50
Cable Entry                             11xø19mm Knockout in top of the cabinet

Ordering Information

Model
Description
RE-104-R
4 ZONE Fire Alarm Panel
RE-104-W
4 ZONE Fire Alarm Panel
 
Note:
R- Red Color, W-White Color
Compatible Devices

Model
Description
RE-316S-2L
Photoelectric Smoke detector with base.
RE-316H-2L
Heat detector with base.
RE-316SH-2L
Photoelectric & Heat detector with base

Comments

Post a Comment

Popular posts from this blog

Schematic CCTV Camera Installation Wiring Diagram

-
Image
Roborix Wireless IP NVR CCTV Security Camera Kit/ 4 Channel NVR/720P HD Infrared Bullet Cameras Day/Night Vision/Weather Proof /Indoor/Outdoor IP CCTV Cameras Vs Conventional CCTV Cameras Security is of utmost importance these days. Everyone wants to feel safe and sound in the comfort of their homes or at work along with ensuring safety of their loved ones. In a country like Singapore which is the fourth largest and one of the busiest ports of the world, security cannot be taken lightly. The country has been consistently among top for the standards of living, healthcare facilities, education and the likes internationally. The demand for the CCTV cameras has been on a constant rise from the last few years because of the long list of advantages that they come with apart from being efficient, reliable and cost effective. However, selecting the right kind of CCTV camera for your home or office is another Herculean task that one needs to undertake before actually feeling sec
Read more

CCTV Surveillance System Installation

-
Image
How To Install CCTV Cameras With Cat5 UTP Fair Cctv Wiring Diagram ...   Install billfold doors new construction Install billfold doors new construction: CCTV installation accessories. Diagram of CCTV installations | Wiring Diagram for CCTV System CCTV camera installation
Read more

Central Monitoring System (CMS) for CCTV

-
Image
Central Monitoring System (CMS) for CCTV Nowadays, it is just not enough to install a security camera to observe the behavior or activities in your place, be it your home or your work space. It has become necessary now to install a CCTV to protect your company’s reputation and your assets but however, the next smart move would be to install Central Monitoring System software. It is a smarter and most efficient way to exercise control over your CCTV s and the way to a better future. What is central monitoring system? For people who are wondering exactly what central monitoring system is, well, it is essentially the software that allows you to connect to various DVRs or Digital Video Recorder.  The software is designed in such a way that it caters to the needs of the one managing the system of the CCTV footage.  You don’t need other instruments to remotely access each CCTV outlet, but can easily do it from a single system like a PC which has the software installed, t
Read more